See What Ghost 2 Immobiliser Reviews Tricks The Celebs Are Utilizing

Ghost 2 Immobiliser

ghost immobiliser tracker is a wireless system that safeguards against key-cloning. It connects to the ECU unit through the CAN data network. It is quiet and can't be recognized by thieves.

It is only disarmed by pressing a certain button sequence (like PIN code) that you have programmed with the buttons of your vehicle - like those on the steering wheel or centre console.

Guards Your Car from Theft

Car theft is on the rise, and vehicles are taken away in a matter of seconds. It is essential that car owners take into consideration the additional security measures they can take. Immobilisers are one of the most effective and most well-established methods to protect your vehicle. Ghost immobilisers can be an excellent choice since they are small and tucked away within the vehicle's wires. They also don't emit radio frequency signals. They are therefore untraceable and can be put in without having an impact on the CAN bus system in your vehicle.

Our ghost immobiliser near you can only be disarmed with the pin code that we set up at the time of installation. This unique disarming sequence utilizes buttons on your steering wheel, doors, or centre consoles to stop anyone from driving away with your car. This makes it impossible for thieves to copy your key or use jamming/spoofing devices which can disable normal immobilisers.

Not only does a ghost immobiliser prevent your car from being driven, but it also stops the car from being smashed to make parts. This is a rising issue in the UK due to the growing popularity of these types of automobiles. It can happen in less than one minute. TTW ghost immobiliser review immobilisers can be programmed to shield vehicles from attacks like this.

Installing our Ghost 2 immobiliser will stop your car from being taken at a service station, or even if it is driven into the garage by employees. This is because the ghost 2 immobiliser reviews can be put into Service/Valet mode and will only allow a unique button sequence to be entered by our customers.

Contact us today if are interested in learning more about our Ghost immobilisers or if you'd like a no-cost quote. We're happy to assist you and give you peace of mind knowing that your vehicle will be protected at all time.

No Key Fobs, LED Indications, or Key Fobs to identify its location.

This non-detectable car immobiliser integrates with your car's CAN network to protect your vehicle against the latest type of car crime. Ghost is distinct from other CAN-immobilisers made by aftermarket vendors that rely on LED indicators or key fobs to function. Instead, it utilizes the buttons that are on your vehicle's standard factory controls, like the ones on the steering wheel or doors. This means that a hidden pin code is created which must be entered before your vehicle starts, making it completely undetectable to thieves.

The CAN-BUS immobiliser's developers have added additional security methods to guard the device from being breached or hacked. It also has CANBUS blocking and physical immobiliser cuts, meaning that even when you lose your keys, the thief won't be able to steal your car immobiliser ghost with your pride and Joy.

Installing the CAN-BUS in your vehicle is a straightforward and fast procedure that only takes 30 minutes. We will have one of our staff in your area to arrange a time and location that works for you. After your vehicle has been fitted, you will receive an identification number and security codes for your phone as well as the app to make it easy to use and ensure you are always in charge of your car's security.

The system is available on a wide range of modern vehicles, however should you own a special or vintage vehicle, please get in touch to see if it is compatible. The cost of installation and supply of the Ghost Immobiliser 2 is APS449 and your car will be added to the International Security Register if fitted by one of our approved installers. Please do not hesitate to contact our friendly team if you have any questions. We'd love to hear from you.

Easy To Set Up And Programming

Modern cars are usually fitted with immobilisers to prevent thieves from stealing or hot-wiring your car. Immobilisers are more effective than physical deterrents such as wheel locks and steering wheel clamps due to the fact that they are built into the vehicle.

The system is directly connected to the CAN data network of your vehicle. It will stop it from starting until you enter an individual code. The unit is sealed and so small it can be positioned practically anywhere in your car without the requirement for additional wiring. It also doesn't emit any radio frequency signals so it cannot be detected by RF scanners or code grabbing devices used by thieves.

Ghost uses the buttons on your steering wheel, door panels and centre console of your vehicle to create a customized (like pin code) disarm sequence that has to be entered to start your car. The pin code sequence can be altered at any time and is based on four to twenty button presses. You can even place your car in Service/Valet mode so that it is able to be operated, but the vehicle is not able to start or drive. This will ensure that your vehicle is secure when you bring it in for service or valet parking. Also, make sure that the mechanic doesn't have access to your pin code in order to deactivate your system.

You can use our app to set an interim pin for your ghost device in the event that you plan to be away from your car for an extended period of time, such as a holiday or work trip. You can also enter your pin code manually whenever you want to drive the vehicle.

Our CAN bus immobiliser can also be connected to a remote key fob and tracker (Brand dependent) which will have precedence over the Ghost 2 immobiliser Review system. This will give you extra security in the event that your vehicle is stolen or if your keys get lost.

Contact us today to discuss what we can do to protect your vehicle against key-cloning or hacking. We offer our services throughout the UK and in our own installation centre in Derby.

Service/Valet mode

Modern cars are equipped with sophisticated eco systems that have stop/start functions that require the correct inputs for them to work correctly. For example the voltage of the battery and temperatures of the engine, as well as external temperatures and which electrical systems are active. These can sometimes cause problems, and it can be difficult to determine if the problem is Ghost-related or not. This is especially true if your vehicle has been recently cleaned or valet-parked. If this is the case, you can switch to the ghost service mode, which allows the vehicle to start and drive without the need for a pin. This is useful when your car's being maintained by an independent garage or valet-parked.

To enter service mode, press the button for service 5 times. The indicator will flash twice when the service mode is selected. You can leave this mode at any point by entering a PIN number. After you exited the service mode, the Ghost immobiliser will go back to normal operation.

This is a very discrete system that communicates with the vehicle ECU via the CAN data circuit. It connects directly to the original buttons of the vehicle and does not use radio frequency signals like other immobilisers. This makes it virtually impossible for any other device to bypass or hack - even jamming devices that mimic codes from an original key fob have no impact on this system.

It is a TASSA-verified anti-theft system that meets the highest protection standards. This includes an exclusive vehicle marking system that is linked to the international security register that is an insurance company requirement.

The ghost immobiliser is very compact form factor and can be easily concealed within the wiring of your vehicle's factory, making it near impossible for thieves to locate. The unit that is sealed is so small that it can be mounted in many areas of the vehicle, including under dashboards or on the steering wheels.

The system makes use of buttons on your vehicle, such as those found on the steering wheel, door panels or the centre console, to allow you to create a unique and changing sequence of disarming that can be as long as 20 presses that need to be completed to start your vehicle. It can be entered by anyone with your pin code - it is safe and secure for you and your family members, colleagues or friends to use.