Fitting A Cat Flap

Fitting a cat flap can be a bit daunting however it's actually quite simple with the right instructions. First, decide how much to install a cat flap high you would like the flap to be (on average or belly height). Mark this point on the door and use the template included as a guide to drill.

If you have a young kitten, prop the door open very slightly and fitting a cat flap gradually push it to enter. Reward the kitten as it goes through.

Measure the Door

A cat flap lets your pet to go in and out of your home at any time. This can help with keeping your cat healthy by ensuring that it is exercising as well as being able to get back in if trapped outside in the rainy weather, especially during the winter. It can also cut down on the amount of time you need to let it in or out and can ensure your home is secure by allowing you to know when it's been out.

However, it is important that the flap on your cat is correctly fitted to prevent your pet from escaping through it or be pushed through by any other animals (e.g. dogs). You should measure the height of your pet's belly and the size of the doorway in your home to ensure that the flap is at the proper height. If your cat is a little taller or shorter than average, you can alter the flap's height by moving it up or down by a tiny amount.

Then, use a spirit-level to mark the middle of the door. This is where you will put in the flap. Using the marking as a reference, use the jigsaw and cut the form of the flap within the door. After you've cut the area, sand down the edges to create smooth surfaces. Make any holes that are required.

The process of fitting a cat flap isn't as difficult as you believe and it shouldn't take more than two hours for the entire job from start to completion. However, the process could be slightly more complicated if you need to fit it onto a uPVC or composite door because these doors come in an array of thicknesses, which affect how the holes are cut and what they are fixed into. We always suggest that you call an expert for your first time working with glass.

Measure Your Cat

You can avoid hours of ignoring the cat's meows to be allowed in or out. This is especially helpful when you're at work all day and your cat has to stay in the house waiting for you to get home in all weathers.

It is essential to first measure your cat flaps for french doors before attempting to install. While it may seem an easy task, it is crucial to get the measurement right or your cat will find it difficult to use.

First, Fitting a cat flap ensure that your cat is calm prior to taking measurements. You will have to hold your cat in a place in which they cannot move. Also, make sure that the measuring tape is flat and not curved against the body. You can get a precise measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you've figured out the measurements of your cat, it is time to look at the door and decide on where to place the flap. Place the flap at the level of your cat flap installation cost near me's belly. This will allow them to walk through the door with minimal effort. This will also avoid the flap from making lots of noise when it swings open and closed.

You should take into consideration the thickness of the uPVC or composite door too. While timber doors are of the same thickness, uPVC and composite doors may differ in their overall structure, which can make fitting a cat flap more complicated since you have to make sure the hole you cut is the right size for your pet.

You can make use of the template included in the instructions to mark the position of the hole on the door. This will allow you to see the location where the opening should be, and also to make sure that the template is correctly positioned on the door. It is also beneficial to use a spirit-level to ensure that the template sits in a straight line against the door.

Cut the Flap

Before you can install your cat flap you have to cut the door panel in order to make it large enough for it. It's a challenging task, so it's recommended that you hire a professional to assist you if you do not have the skills or experience. You can also read the instructions included with the kit to discover how to do it correctly.

To do this, you have to determine the height of your cat's or kitten's belly and use that as an indicator point. As a rule of thumb you should place the flap around 10-15 centimeters higher than the ground. This is the typical height of the belly for cats. This will let your cat pass through the flap with ease and make it more difficult for other cats and nosy neighbours to enter or exit.

Once you've decided where the cat flap should be positioned, mark this location on the door using pencil. If your kit comes with the template, place it over the door. Use the markings on the template to drill holes at every corner. Then, you should be able to cut out the template shape and replace it with the cat flap.

If you are installing your cat flap in the form of a door made of wood or uPVC, you are able to do it yourself if you are confident enough to use using a jigsaw. Be cautious not to cut through the mullions or rails that run vertically of your door. You can use a jigsaw to cut the panel into a circle or square according to the design of your cat flap. Be patient and don't try to force the jigsaw into cutting faster.

Once the hole is cut, carefully place your cat flap in its new home. Make sure that it is solidly secured. If it features caps on the screws, then place these onto the protruding screws. Once the screws have been installed then sand the rough edges and then apply sealant to any gaps. This will stop drafts from entering your home.

Fit the Flap

If you have a simple cat flap, you can leave it open and encourage your pet to walk through by putting a little bit of cat food in front of the door. Alternately, you can push the cat through using your hand or a stick. Once your pet has become accustomed to walking through the flap, it will be capable of walking through the flap at will. This lets you let it in and out whenever it's wanted.

It is possible to fit an animal flap inside a UPVC or glass door although this may not be quite as straightforward as fitting one into a timber external door since the UPVC doors and some glass doors don't have a consistent thickness. This can have a major impact on how you cut out the flap's hole and how well the flap fits after installation.

Depending on the type of cat flap you pick It could be equipped with a mounting kit as well as a template that will tell exactly where to drill holes for it. If the kit doesn't come with the template, you can photocopy it to create your own. It is important not to push the jigsaw too hard when cutting, so that it doesn't create a larger than needed hole in your door.

Certain cat flaps come in circular shapes, which can be more difficult to put in. If you have a round flap, make sure that the hole is located in the correct place on your door. Otherwise, the cat might not be able use it, and could be locked outside for the entire day (or at night).

Certain models of cat flaps have locks which permit you to regulate when your cat comes in and goes. They can be extremely useful if you're worried about your cat going out at night and then coming back in the darkness, or you're working all day. The lock can be turned on to allow or deny entry, and some can be locked in both directions, permitting you to close the door completely, which is especially helpful for sick or elderly cats who don't want to go out in bad weather.