What Is The Best Place To Research Saab 9-3 Key Replacement Online

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of specific steps to add a second ignition key. This requires a handheld computer, called Tech-2 which is used by the dealer. A new key and transponder need to be bought and then programmed to the car.

It is recommended to rotate your keys in order that one doesn't wear out faster than the other. This will also ensure that your keys remain in top shape.

replacement saab car keys Case

The new key fobs are not like the old Saab keys. They are equipped with electronics that make it difficult to duplicate. This has made car theft significantly more difficult than 20 years ago. However, it has also made replacing lost keys an incredibly expensive endeavor.

Saab 9-3 owners should have two working keys. It costs a fortune to replace a lost key as it requires replacing the CIM module, and changing the locking cylinders. Dealers charge between $100-$200 for this.

There are ways to reduce these costly costs. Some parts suppliers can look up the code from a spare key (usually the same one that opens the doors and turns off the ignition) and cut a new key blade out of metal for only a fraction of the dealer's cost. The key must be the exact same as the original for it to function in your vehicle.

Follow these steps to replace the case. You'll require a flathead and a lot of patience. With the screwdriver you can pull apart the plastic and remove the emergency key. Once the case is open, remove all electronics and put them in your new case. Make sure you put the correct badge and key back into the case, as well.

Replacement Battery

The replacement battery for the Saab 9-3 is an affordable part that can be replaced easily and quickly. This YouTube video by Cyclone Cyd demonstrates the procedure for replacing the battery of the remote fob with just four simple steps. This tutorial should work for any modern-day saab key programming key fob though the process may vary slightly.

The first step is to find the button that lets off the backup key within the fob. This button is usually on the back of the fob, next to the Saab Logo. Next take a flathead screwdriver into the small hole of this button. This should be enough to allow you to open the fob case in order to change the battery.

Once the new CR1632 battery is in place then you can reassemble your remote key fob. You can then program it to your car. The entire process should take no more than an hour at most. It's a simple process that doesn't require any special tools.

If you lose your key, the procedure will be more complicated, but it can still be done. The dealer will have to verify the VIN of the car, and then request a replacement key blade and a TWICE module with the exact unique code. The dealer will then need to program the key using MDI an innovative software tool.

Replacement Key Fob

The key fob is a device that locks and unlocks your car, it has batteries inside. Batteries have a limited lifespan and eventually will die. It is a common problem with all cars. The good thing is that you can replace the battery in most key fobs, without having to replace the entire case. You can buy replacement fobs on Amazon that have all the electronics already installed, so you can simply open the case and replace the batteries in the original case. It is necessary to remove the emergency key before you can replace the batteries. To accomplish this, simply insert the screwdriver of a small flat head into the slot that is in the middle. Work the screwdriver around the case, and it should split open, making it simple to remove.

If you're ready to replace your keys, keep a spare in your possession. This will save you lots of money. If you have spare keys, you can request that the dealer cut a new key and program it into your car, which is much cheaper than replacing the whole key fob.

It is possible to add another key to your car if you don't already have one, but it takes some research and work. It costs around a hundred bucks to add a second car key. The computer of the car also needs to be programmed. This can be accomplished by a professional, however it's a costly choice for the majority of owners.

Replacement Ignition

In contrast to earlier saab 93 key programming automobiles, the current SAAB 9-3 models use an extremely sophisticated alarm system that is built around a coded key. This means that should you lose only one functioning key, getting another one could be very expensive as the car has to have a special computer module fitted and also must be specially programmed to accept an extra key. Even dealers can charge hundreds of dollars to program a new key when they are not able to do it.

Dealers will charge you a premium to replace your car computer (also called the CIM or saab 93 key replacement twice) when you lose your only working key. We can reprogram the EEPROM of your car's computer so that it's prepared for a new key. This will save you more than 50% on the price you'd have to pay the dealer.

If you've been an owner of a 03-11 saab 9-3 key programming (Historydb official website) 9-3, then you probably are aware that the ignition key isn't all that durable. They can get extremely sticky and the buttons can be ripped off every now and then It is recommended that you consider buying a new one if the one you have isn't performing as it should. It's good to know that replacing the ignition key isn't as difficult as it seems, and it can be done quickly using the right tools.