Window Repair Explained In Fewer Than 140 Characters

window repairs (visit Technetbloggers here >>)

Window repairs can help homeowners save money and help keep their homes warm. In the event of severe damages, like broken glass or a shattered frame, window replacement may be required.

But there are many other issues that can be repaired to extend the lifespan of your windows. Some common issues include:

Cracked or Broken Panes

It's a rock that's been thrown by your lawnmower or a tree branch blown by high winds, damaged upvc window repairs near me glass is not only visually unappealing, but also can result in higher electricity bills as the broken pieces allow cold air to enter your home. Fortunately, it's generally easy to fix windows with broken panes.

Begin by carefully removing glass using gloves and sunglasses. You may need to use a utility knife to break loose the old glazing compound or putty around the frame's edges. Next, wipe down the glass's surface and the frame's wood using a soft cloth or paper towel.

After cleaning the area, apply a silicone caulking that is waterproof to the frame's perimeter. This will stop water from getting into the frame through the crack and cause further damage.

If you have double-pane glass a bad crack could compromise the gas layer that lies between the panes and make your windows less insulative. If the crack is significant enough to threaten the integrity of the glass or the glass has an inner pane that's totally missing, it might be time to contact an expert.

Cracks caused by thermal stress can occur when there's a significant temperature difference inside and outside your home. This causes the glass to expand and shrink. If this happens to two windows it's best to simply replace the pane rather than trying to repair it.

For cracked windows that aren't quite ready to be replaced Clear tape can do a good job of preventing the crack from spreading and keeping out bugs and cold air. You can cut an amount of nylon stocking big enough to cover the entire crack, and then attach it using duct tape. This isn't a long-term solution, but it works well in the event of a crisis and keeps insects and cold air out of your home. If you notice cracks on your older windows, you should check with your local business to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is a frequent problem with windows. It can degrade a house's appearance and create a safety risk. However, it is possible to repair rotted wood. First, you will need to ensure that the source of the rot has been taken care of. Look for leaks on the roof and other places where water can enter the wood.

The next step is to take out any rotten parts of the window frame. This can be done using either a chisel, a rasp or claw hammer. After you have removed the decayed wood, you'll need to replace it with fresh wood. It is recommended to make use of pre-treated wood for this task as it is more resistant to rot. If you are unable to replace the wood that has been damaged, you can try using wood hardener or filler to repair the damaged area. This type of product will be found in a lot of hardware stores. To get the best results, adhere to the directions on the label.

After you have repaired the damaged areas of the window repair near me sill, it is essential to safeguard the area. You can do this by applying an water-resistant wood sealant. A product like Sikkens is a good choice for this job.

You can also use a two-part epoxy filler to protect the wood from further damage. This product is easy to apply and leaves a nice finish. It is crucial to follow the directions on the label. After the epoxy filler dries it is possible to sand the wood's surface. It is best to start with a rough piece of sandpaper before moving to a smoother one.

You do not want to expose the damaged part to further moisture. Therefore, it is recommended to cover the area that has been repaired with an oil-based primer that will protect it from moisture. Then, you can apply waterproof wood sealant.

The W won't let you open

A window that won't open could be due to various reasons. The house may have settled, or the wood frames may have warped in humid weather. Someone might have also nailed them shut for security. However, with a little patience and the right tools, many windows that are locked can be opened.

Gunk or debris that has accumulated can be a major cause of a window not opening. Grime and dirt build up on the sliding tracks, hinges and locks over time, says Acme Glass. Metal hardware can also rust when it comes in contact with humidity and direct sunlight. Making sure these areas are lubricated with spray grease can prevent corrosion and keep your window operating well.

The pulleys that raise or lower the window can become loose, or even break. These components can lose tension and cause obstruction when they are situated higher than two floors higher than the ground.

If you are having difficulty opening a door, try using a pry-bar to gently open the window. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Alternately, you can run a hair dryer across the edges of the frame for a few minutes to warm the wood and help it to move more easily.

A damaged spring can be the reason for a window that won't raise or lower. You will need to consult the owner's manual for more details based on the manufacturer of your windows.

If you've tried cleaning the moving parts of your windows and lubricating them, but they're still unable to open it could be the right time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let your windows go from functional to unusable because a window that isn't properly shut could expose your home to burglary and water damage. Contact our team to learn more about our windows replacement and services today!