Are You In Search Of Inspiration Look Up How Much Is A Ghost Immobiliser
Ghost 2 Immobiliser Problems
The Ghost 2 immobiliser, designed to protect cars from key cloning or hacking, is a small device that can be installed without damaging your vehicle. It stops you from starting your car unless you have entered the correct sequence of buttons in your vehicle. It is similar to the mobile password.
Stop/Start
Ghost Immobilisers protect vehicles from being stolen by stopping the engine from running unless it receives the correct PIN code. This is done without modifying the vehicle, and is not detected by thieves. The unit communicates with the ECU on the CAN data bus to immobilise the vehicle. This system is very like the one car manufacturers have been using in their vehicles for a long time, however, the thief can't add a new key or utilize key relay technology to bypass it as they can with factory fitted systems.
Ghost Ghost can be fitted to any van, car, motorhome, caravan or bicycle that has an engine. It's compatible with all major brands of vehicles. The same system is also compatible with electric cars. It's a great alternative to locking the steering wheel and wheel clamps, and can be installed with a minimum of effort.
When the ghost vehicle immobiliser is armed it will block all the buttons in your vehicle and stop the ignition from starting unless a PIN code has been entered first. This can be accomplished using the Android or Apple mobile app or by manually entering the code via your key fob. If a wrong code is entered, the app will display an indicator light and the Ghost will not allow the vehicle to start again. This is a great way to discourage thieves. If the vehicle can't be started, they will move on.
The Ghost is a weatherproof, small device that is able to be hidden behind the most difficult-to-access parts of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also easy to take off if you decide to switch vehicles, or even give it to the valet or service center parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) an insurance-approved system that is recognized by certain insurance companies. It also comes with an emergency Pin Code override and features the Service/Valet Mode which can be activated with an app button or by using your key fob.
Disarm
Ghost immobilisers like mechanical anti-theft devices that can be removed, are concealed within the car. They are virtually impossible to bypass or hack and, even if they are found, a thief will not be able to start the engine. A ghost immobiliser is capable of preventing key cloning as well as devices spoofing signals and signal jamming. These are techniques thieves employ to gain access into vehicles equipped that have standard immobilisers.
The immobiliser sends a code to the ECU. If a wrong code is sent and the vehicle is not started because the engine won't start up. Although it is possible to disable the ghost immobiliser by using software, it is laborious and time-consuming. The software must be installed and used by an authorised installer.
The Ghost immobiliser, a tiny system, is hidden within the vehicle's wiring loom. It is not visible to the naked eye once installed. It will not show up on diagnostic systems, there are no LED indicators, and it does not connect to the engine via the OBD port. It communicates in silence through the CAN data loop.
The system will prevent the vehicle from starting until it is given a specific PIN code sequence. This can be entered using buttons on the steering wheel and door panels as well as the central console. This is a safer way to safeguard the car because it doesn't need a remote control or key fob.
Ghost also has a service-mode that can be turned on via the mobile application. This will allow you to hand over your keys to someone for valet parking or servicing without entering the disarm sequence.
Whether your ghost immobiliser car is in service mode or not you should not attempt to remove the system on your own as it can affect your engine and cause damage. It is recommended to speak with a TASSA-verified installer who can safely and properly remove the system. Our latest ghost immobiliser problems immobilisers have a specific fingerprint QR sticker hidden in various parts of your vehicle. They are linked to our security register. In the event that the device is removed and then sold on the blackmarket this will allow you to trace the owner of the system.
Anti-Hijack
The anti-hijack feature is an essential feature of the Ghost Immobiliser 2. This system is a smart key that shields your vehicle from theft. Whenever the ignition switch is turned to on and the vehicle is stationary for 30 seconds then the Ghost system will stop the engine and turn the hazards lights on. This gives the driver and passengers time to press the security button before the system can be activated.
In contrast to other systems that simply stop the engine when the ignition is switched on The Ghost system is based on a specific controller and timer unit which will shut off the valve that cuts off fuel when it is activated after the set time, even in the event that the ignition is in operation! This delay time period must be sufficiently long to allow the owner of the vehicle who was hijacked of the vehicle to drive away from the scene of the incident and to maintain a sufficient distance from the vehicle in which it is stuck before the system can reactivate.
In addition to the standard CANbus immobiliser blocking features of the Ghost system, it also comes with an additional security level that blocks common methods of hacking used to gain access to modern vehicles, such as relay attacks, key range extending and ECU swapping. The Ghost system communicates in a non-intrusive way and does not emit signals that could be snatched by thieves using code-grabbing technology or RF scanning.
The Ghost system comes with a service / valet mode which allows your vehicle to be re-started and driven without the need for a PIN code. This is a great option when you park your vehicle and only need to leave it briefly, such as to open the garage door or place groceries in the boot. The system will exit service mode according to speed and duration or via the simple PIN code entry process and give you peace of mind that only YOU are able to utilize your vehicle!
Keyless Entry
With the rise of contactless car theft numerous customers are looking into extra security options. This is especially applicable to those who have invested time or money into personalising their vehicle or own expensive vehicles. Immobilisers with add-ons can be a good way to prevent this kind of theft since they prevent your car from starting until the correct pin code is entered, along with your key fob.
Immobilisers are made to work with different vehicle circuits, including ones which control starter motors and fuel pumps. They can also shut off the car alarm in order to attract attention and scare away potential thieves.
These devices communicate with the engine control unit (ECU) via the CAN data circuit. They also they stop the thief trying to get around it by installing a new ECU or using a key programmer. The immobilisers are fitted discreetly and leave no marks in your vehicle. They are also undetectable by sophisticated tools used by thieves.
Unlike other systems that require a specific application, or a tag to be carried on the person carrying it and a Ghost immobiliser is only disarmed by pressing a pattern of the existing electronic buttons on your steering wheel, door panel, and the centre console, which allows you to choose a custom pin sequence. The pin can easily be changed to make the device as secure as a credit card. It is also more difficult to break because it takes up to 20 press.
Ghost also comes with the option of a valet/service mode that lets you deactivate the system if your vehicle is to be turned over for valet parking or service which allows it to operate within set parameters, like 30mph speed limits which means you don't need to worry about your car being driven at a reckless speed. It is then reactivated with the original key or appropriate entry code.
Installed by our accredited installers, it is the most secure and effective aftermarket CAN-immobiliser available. It is also fully approved by Thatcham for insurance purposes. The Ghost 2 immobiliser is also provided with six QR fingerprint labels, an ISR contact card containing your unique QR code and an emergency code that is secure that can be kept in the purse or wallet of your car.