20 Trailblazers Setting The Standard In Upvc Window Replacement Hinges

Choosing Upvc Window Replacement Hinges

It's not as difficult as it might appear to choose and install Upvc replacement hinges. It is crucial to ensure that the arrow on the hinges is facing the right way and the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.

There are several different types of hinges, each having their own unique features. This article will focus on the most common kinds of uPVC window hinges and the advantages they offer.

Egress/Easy Clean Hinge

These are a great choice for replacing or upgrading your fire escape safety windows because they can open to a full 90 degree angle. They can be disengaged to an easy-clean position that allows you to see the windows' exterior without having to climb ladders or lean at risky angles.

Yale is among the most reputable and well-known brands in the world of home security. These hinges can be used with any kind of uPVC side-hung windows. They can be moved into the easy-to-clean position by pressing in the small button and uPVC friction hinges moving the window sash to one side. Once closed, the window sash will revert to its original position.

They are available in both 13mm and 17mm stack heights. Based on the size of your existing window we recommend using our Egress Selection Guide to determine the best product for your needs.

These hinges can be used with traditional side-hung frames made from upvc doors hinges, or aluminium. The friction screw is used to adjust the resistance. This allows for easier opening of the window and reduces the risk of an accidental closure during strong winds. They have been cycle tested to more than 30000 cycles and are in compliance with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinge is easy to operate and has no buttons or catch. It provides a convenient and safe solution for emergency exit and cleaning. Use the hinge retention clip located on the inside of the bottom corner. This will release the bottom and top catches which will allow you to move the sash back into the clean position. Close the window when you have the sash in an easy-cleaning position. This will reset the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges, often known as "Easy Clean" hinges are used to replace windows that open sideways to allow egress (fire safety) reasons. These kinds of hinges for windows are more spacious and more efficient than standard hinges to allow an expansive clear opening to escape in the case of a fire. The building regulations state that this type of hinge should be placed in any space that is habitable and has a double glazed window hinge.

The windows feature an elongated friction that permits the windows to open up to 90 degrees. They also allow the opening sash to slide across the glass when it's opened, allowing for easy cleaning without the need to use ladders. The hinges are easy to operate and do not have complicated buttons or catches. They can be operated from the inside of the home using a safe, simple lever.

The hinges are made in the UK by Cotswold and come with a child safety restraint for day to day use that can be reverted with a hidden button, giving you peace of mind that your children will not accidentally open the window too far. They are available in 13mm and 17mm stack heights.

Take a measurement of the length of the existing side-hung window hinge, which is fixed to the frame. (See the guide on measuring upvc window hinges). Choose the right size hinge from the list below.

Be aware that the measurement is taken from the part that fixes to the frame and not the sash. The actual hinge length may be shorter or larger based on the manufacturer of your old windows. When deciding on the width of the hinge, most upvc frames will fit the 13mm stack height however if your original window frame measures 17mm, then select this option. You can also install the 4mm packer to make up the difference. All hinges come handed (1 left and 1 right). Screws aren't included with the hinges. These can be bought separately if needed. Our window repair screws made of upvc are recommended. They are specifically designed to improve the performance of your hinges that allow them to run efficiently for a longer. They feature a less friction design and an improved weather seal with a new nylon reducer cap.

Restricted Hinge

Standard hinges can make it difficult to open a window fully. These child safety friction hinges are a great solution to this problem. They can be used in situations where ventilation is required, but cleaning or escape from the flame is not feasible. They limit the possibility of opening the sash, and allow overriding this limitation by pressing a button. They are available in 13mm and 17mm stack heights and can be used for both top and side hung windows.

The Nico Restricted Egress Friction Hinge combines the advantages of a standard restrictor with an escape hinge to offer an efficient and simple method to meet building regulations. It is suitable for side-hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is available in a pair, where one hinge is the restricted egress and the second is free, allowing one to be installed on the bottom of the sash while the other is attached to the top.

These uPVC hinges are made to be used with windows that cannot be fully opened, such as the bedroom of a child. The mechanism limits the amount the sash is able to open to the safety level of 100mm and re-engages when the window is closed.

Like the other kinds of upvc friction hinges (more info) that are available, these hinges can be used on any type of window and are suitable for difficult to access windows above ground level, three-storey flats or windows that normally require a ladder to reach them. They can be combined by our security features like hinge guard protection plates or dog bolts to provide PAS 24 performance.

When replacing a hinge on a window, it is essential to measure the length of the existing hinge to ensure that you get replacements that are comparable in size. The easiest method to do this is to look at the hinge in the image gallery and working out the location you would like it to be placed. The top hung hinges can only be positioned on one side, while the side hung hinges can only be put on one side.

Standard Hinge

A standard hinge uses metal-to-metal contact, and there are no additional components to reduce friction. It is available in a variety of finishes and also has a fire rating. For a quick way to determine the radius of your hinge lay it flat and line up a dime and quarter in two corners. If the quarter is more snug than the corner, then it should be turned to 5/8 inches.

Selecting the right hinge can determine the success or failure of your door's appearance. It's important to match the style and finish of your patio door hinges with the hinges to create a seamless appearance that is both functional and visually attractive.